Ethernet Extender Coaxial Twisted Pair BNC Network Transmitter Support IPTV 1080P

Features: IP cameras over coax is becoming a common installation practice when retrofitting existing analog video site. IP extender over coax is a low cost and easy, speedy solution to allow you use existing coax cable to send IP camera signal. This product adopts coaxial cable (or two core cable Cat5/6) instead of traditional network cable to transmit megapixel HD network videos. It can transmit up to 2KM and can transmit multichannel IP videos at the same time by one cable. It can solve the problem of IP camera’s short transmission distance with advantages of easy installation, labour and equipment cost saving, and no need of fiber optic any more. Long Communication Distance The transmission distance can reach to 2KM without any repeater, which greatly helps at network cabling and also avoids the problem that network construction must be equipped with Ethernet switches when transmission distance is over 100M. For RG59/RG6 cable, it can keep the TCP/IP throughput not less than 25Mbps while transmission distance up to 2000M. High Performance With strong interference anti- function, can adapt to all kinds of wiring environment, can be used for road, bridge, elevator, tunnel and other environment. Easy Installation Plug and play, no need of software and hardware settings, Auto detect Master / Slave unit and the transmitting and receiving devices are the same. It can upgrade existing common cameras into megapixel HD cameras without wire change. Low Cost Use low cost cable to transmit. Fast Upgrade It can upgrade original system into digital system, make application more comprehensive. Specification: LED Indicator: PWE: Power LED RUN: Connection status (Coax) LINK: Ethernet Link Status Power Supply: 12V DC 1A Power Jack: 55mm*2.1mm Dimension: 95*92*25mm Maximum Power Consumption: 15.4W Maximum Ethernet Speed: 100Mbps Shiping Weight: 0.8kg Cable Requirement: RG59/RG6/ Cat5e/Cat6/Telephone wire ** The Maximum Length & Speed may vary due to differetnt environment / Installation / Cable quality LED Indicator: PWR LED: On= Power OK, Off= No Power LINK LED: On= Ethernet Link OK TWISTED PAIR LED: On= Coaxial cable link OK Package Contents: 1 Pair Coax to Ethernet Converter