Phoenix Contact DIN Rail Solid State Relay - 2964283

Manufacturer: Phoenix Contact Mfr. Part No.: 2964283 Phoenix Contact dc/dc, dc/ac & ac/dc Opto-Couplers DEK-OE-24DC/24DC/100KHZ These DIN rail mount opto-couplers provide an ideal means of interfacing on/off signals to, or from, equipment, whilst providing electrical isolation between their own inputs and outputs. In other words, these may be used to protect equipment by electrically isolating its inputs, outputs, or both. The dc/ac and ac/dc versions also provide a means of interfacing (whilst isolating) ac and dc control voltages. Features and Benefits dc in/dc out, dc in/ac out and ac in/dc out versions available Versions with switching speeds up to 100kHz available 2.5kVac input to output isolation LED status indication Module width 6.2mm Operating temperature range: -20 to +60°C Standards IEC 60 664, IEC 60 664A, DIN VDE 0110 DEK-OE-24DC/24DC/100KHZ An Input solid-state relay for DIN rail mounting, with yellow LED display and includes signal inputs on PLC counter boards. Features and Benefits • Reverse polarity and surge protection • Screw connection • Capacitor on the input side for interference suppression • M3 thread Note Use of EB 80-DIK... bridges in the DEK terminal blocks: Absorption of humidity from the ambient air as well as an unfavourable tolerance between a larger number of DEK terminal blocks and the EB 80-DIK... bridge may cause (minor) expansion of the DEK housing. When the EB 80-DIK... bridges are used, therefore, it is recommended that these be disconnected after about 10 to 12 DEK terminal blocks and a wire bridge to the next DEK terminal block be inserted in their place. Specifications Attribute Value Mounting Type DIN Rail Series DEK-OE- 24DC/24DC/100KHZ Dimensions 56 x 80 x 6.2mm Depth 56mm Maximum Operating Temperature +60°C Minimum Operating Temperature -20°C Operating Temperature Range -20 → +60°C Length 80mm