DREMEL DIAMOND WHEEL POINT 7105

TECHNICAL SPECIFICATIONS Shank diameter: 3.2 mm Working diameter: 4.4 mm Accessory length: 46.0 mm Maximum RPM: 25,000 1/min Maximum speed setting to be used: 25,000 1/min PACKAGING CONTENTS • Quantity: 2 DREMEL DIAMOND WHEEL POINT 7105 Dremel Accessories - Dremel Diamond Wheel Point 7105 Dremel Diamond Wheel Point 7105 is designed for fine detail work, cutting, engraving, carving, touch-up and finishing. Use on wood, jade, ceramic, glass, hardened steel, semi-precious stones and other hard materials. Bits are covered with diamond particles. Dremel Diamond Wheel Point 7105 designed for fine detail work, cutting, engraving, carving, touch-up and finishing. Use on wood, jade, ceramic, glass, hardened steel, semi-precious stones and other hard materials. Bits are covered with diamond particles. It is ideal for fine detail work on wood, jade, ceramic, glass, hardened steel and other hard materials. It can removes material quickly and easily. The bits are covered with diamond particles. Use higher speeds for hard woods and slower speeds for metals. 1/8? shank or 3.2mm. User Tips • For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto the bit. • Secure objects to a stable surface while working. • Use higher speeds for hard woods and slower speeds for metals. • If chattering occurs, increase speed.