DINTEK RJ45 PASS-THROUGH SOLID CORE CAT6 EZI PLUG & EZI LOCK SOLUTION TRANSPARENT BOOT

Dintek RJ45 Pass-Through Solid Core ezi-Plug (1501-88060) - The DINTEK Pass Through RJ45 ezi-PlugTM for both stranded and solid core cables combines the performance advantage of DINTEK design with a design which allows the wires to pass through the connector so the twists in each pair can be pulled closer to the contacts than conventional plugs. - By maintaining the twists as close to the point of termination as possible this significantly decreases crosstalk and markedly increases performance. - This in turn improves the overall headroom capability of the link, providing the end user with the best possible bandwidth. - Making use of DINTEK’s molded RJ45 boots which are crimped into the body of the RJ45 at the time of termination, the DINTEK Pass Through RJ45 ezi-PlugTM is an ideal choice for a customer looking to maximize the performance capability of the entire twisted pair link. Features: For solid and stranded core cables Simplifies RJ45 twisted pair terminations & reduces mistakes Technician can easily verify the proper wiring order Reduces the distance between the wire twists and contact Improves performance by reducing possible signal noise Housing Material - Polycarbonate (PC) UL 94V-0 UL 94V-2 PoE++ & 4PPoE - iEEE 802.3bt level 3 & 4 compliant Applications: 1000BASE-TX Gigabit Ethernet 550MHz Broadband Video 10BASE-T, 100BASE-TX Fast Ethernet, Voice, T1, ISDN PoE++ & 4PPoE - iEEE 802.3bt level 3 & 4 Dintek Cat6 RJ45 Ezi- Lock Solution Rubber Boot (1601-00008) - The DINTEK RJ45 ezi-LOCKTM locking solution for RJ45 plugs is the ideal solution for protecting your vital link from being accidentally disconnected or knocked out while re-patching works are being carried out. - The DINTEK RJ45 ezi-LOCKTM locking solution consists of the strain relief boot and individual locking pin, making the boots suitable for standard RJ45 plugs. - By utilising the ezi-LOCKTM locking boot when fitting off a patch lead, the end user can then decide whether or not to lock the plug in place by inserting the locking pin through the boot and preventing the RJ45 lock tab from being depressed Applications: Data Center Use for securing connections Main server connection protection 1000BASE-TX Gigabit Ethernet 550MHz Broadband Video 10BASE-T, 100BASE-TX Fast Ethernet, Voice, T1, ISDN 100 VG – AnyLAN (IEEE802.12), 155/622 Mbps ATM PoE++ & 4PPoE - iEEE 802.3bt level 3 & 4 Standards: ANSI/TIA-568-2.D ISO/IEC 11801 CENELEC EN 50173 Features: Compatible with all industry standard Cat.5e and Cat.6 RJ45 Plugs Enhances network security and up-time Prevents accidental disconnection on critical connections Housing Material - Polycarbonate (PC) UL 94V-0 UL 94V-2 Available in Cat.5e and Cat.6 cable size ratings Ideal for Data Center use