DREMEL ENGRAVING CUTTER 107

TECHNICAL SPECIFICATIONS Shank diameter: 3.2 mm Working diameter: 2.4 mm Maximum RPM: 35,000 1/min PACKAGING CONTENTS • Quantity: 3 DREMEL ENGRAVING CUTTER 107 Dremel Accessories - Dremel Engraving Cutter 107 The Dremel Engraving Cutter 107 is a quality cutters for detail engraving, carving, routing in wood, fiberglass, plastic and soft metals. It is ideal for detail engraving, carving and routing. For wood, fiberglass, plastic & soft materials. Not for use with hardened materials. Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics. 1/8? shank or 3.2mm. To perform best results of Dremel Engraving Cutter 107, Dremel recommend users: • Insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto the bit. • Secure objects to a stable surface while working. • Use the sides of the cutter (rather than the tip) for effective cutting. The tip cuts poorly and can break under pressure. • Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics (to avoid melting at the point of contact). • If chattering occurs, increase speed.