DREMEL HIGH SPEED CUTTER 115

TECHNICAL SPECIFICATIONS Shank diameter: 3.2 mm Working diameter: 7.8 mm Maximum RPM: 30,000 1/min PACKAGING CONTENTS • Quantity: 2 DREMEL HIGH SPEED CUTTER 115 Dremel Accessories - Dremel High Speed Cutter 115 The Dremel High Speed Cutter 115 can be used for shaping, hollowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Dremel High Speed Cutter 115 is a versatile, high-quality cutter made of high-grade steel for use on wood, plastic and soft metals. Ideal for shaping, hollowing, grooving, slotting, inlaying and making tapered holes. For use in soft metals, plastics and woods especially on curved surfaces. Use the sides of the cutter (rather than the tip) for effective cutting. Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics. To perform best results of Dremel High Speed Cutter 115, Dremel recommend users: • Insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto the bit. • Secure objects to a stable surface while working. • Use the sides of the cutter (rather than the tip) for effective cutting. The tip cuts poorly and can break under pressure. • Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics (to avoid melting at the point of contact). • If chattering occurs, increase speed.