DREMEL CARBIDE CUTTER SPEAR 9931

TECHNICAL SPECIFICATIONS Shank diameter: 3.2 mm Working diameter: 6.4 mm Accessory length: 45.0 mm Maximum RPM: 35,000 1/min Maximum speed setting to be used: 35,000 1/min PACKAGING CONTENTS • Quantity: 1 DREMEL CARBIDE CUTTER SPEAR 9931 Dremel Accessories - Dremel Carbide Cutter Spear 9931 Dremel Carbide Cutter Spear 9931 is a fast cutting sharp teeth for greater material removal. It it suitable to use on fiberglass, wood, plastic, epoxy, rubber, laminates, particle board, soft metals, ceramic tile. Dremel Carbide Cutter Spear 9931 is a high-speed cutter with teeth made of tungsten carbide, the hardest material next to diamonds. Fast-cutting sharp teeth for greater material removal. Use on fiberglass, wood, plastic, epoxy, rubber, laminates, particleboard and ceramic tile. It uses on fiberglass, wood, plastic, epoxy, rubber, laminates, particleboard and ceramic tile. The teeth made of tungsten carbide, the hardest material next to diamonds. Sharp teeth for greater material removal. Fast cutting. User Tips • For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto the bit. • Secure objects to a stable surface while working. • Use the sides of the cutter (rather than the tip) for effective cutting. The tip cuts poorly and can break under pressure. • If chattering occurs, increase speed.