SELLEYS ALL FIX (80G)

Selleys All Fix is an water based All rounder adhesive that sticks just about anything ! FEATURES Water based, easy water clean up while still wet Safe for children Adjustable within 5-10 minutes Fills minor gaps in uneven surfaces Product Specs Size 30g & 80g Blister pack Colour White Full Cure Time Cures in 6 hours, maximum cure in 24 hours Use Interior where can this product be used? Woodworking Fixing broken toys Repairing wooden picture frames Craft works What materials is this product suitable for? Wood Particle board Metals Glass Ceramics Brick Concrete Cork Polystyrene foam UPVC Many rigid plastics how to use Surfaces to be bonded must be dry, free from grease, oil and dust. Apply Selleys All Fix on needed surface and leave to dry for at least 6 hours. Time to develop bond is increased if surfaces are non-porous or in wet, damp and cool weather. Adhesion may take up to 24 Hours. NOTE: Slow-dry adhesives gives maximum bonding results. Form bonds immediately by pressing parts firmly together or clamped. Can fill minor hairline gaps if needed (not exceeding 10mm) Wipe away excess adhesive with a damp cloth. Dried adhesive is best removed by scraping. Not suitable for bonding plastic such as polyethylene, polypropylene, mirrors, other flexible plastics and rubbers. Use temporary supports when bonding a heavy load – support until adhesive dries. Product to be stored in cool dry place. limitations: Not suitable for permanently wet or damp areas. Not suitable for fixing mirrors. Use Selleys Liquid Nails Mirror Aluminium *Not suitable for polyethylene and polypropylene. Bonds are not water resistant. Protect bonds from water penetration if used in exterior applications. Not resistant to strong acids and strong organic solvents. Do not apply below 10°C. When used near brass or copper, the immediate area of contact will discolour to a blue tone. handy tips Not suitable for permanently wet or damp areas. Not suitable for fixing mirrors. Use Selleys Liquid Nails Mirror Aluminium. *Not suitable for polyethylene and polypropylene. Bonds are not water resistant. Protect bonds from water penetration if used in exterior applications. Not resistant to strong acids and strong organic solvents. Do not apply below 10°C. When used near brass or copper, the immediate area of contact will discolour to a blue tone.