Habotest Digital Clamp Meter 1000V/1000A AC/DC True-RMS NCV Multimeter Clamp Voltage Current Meter HT208

Specifications: &&& HT208A / HT208D Commodity Specifications Brand: HABOTEST DC Voltage: 600mV/6V/60V/600V/1000V AC Voltage: 600mV/6V/60V/600V/750V DC Current: 60A/600A/1000A(HT208A Not Support)/(HT208D Support) AC Current: 60A/600A/1000A DCA Zero: (HT208A Not Support) / (HT208D Support) Resistance: 600Ω/6kΩ/60kΩ/600kΩ/6MΩ/60MΩ Capacitance: 10nF/100nF/1μF/10μF/100μF/1mF/10mF/100mF Frequency: 10Hz/100Hz/1kHz/10kHz/100kHz/1MHz/10MHz Duty: 1%~99% Temperature(°C/°F): -40°C~1000°C(-40°F~1832°F) Counts: 6000 Counts Auto/Manual Range:Support Continuity: YES Diode: YES Data Hold: YES NCV: YES Auto Power Off: YES True RMS: YES VFD: YES Inrush: YES Back Light: YES Flashlight: YES Low Battery Indication: YES 3x1.5V AAA batteries: (NOT Included) Maximum/minimum value measurement: YES Relative value measurement: YES Low impedance input: YES VA—LED: YES Safety Rating: EN61010-1,-2-030; EN61010-2-033; EN61326-1 CAT III 1000V, CAT IV 600V Package List:1 * Digital Clamp Meter ,1 * Thermocouple ,2 * Test Lead, 1 * User Manual(English) 1.This is a dual impedance true RMS digital multimeter integrating a variety of measurements like AC/DC , AC/DC current, frequency, duty ratio, resistance, capacitance, temperature, diode, continuity, NCV, VFD, inrush current, etc.. And there are more ftions like last data hold, flashlight, Max./Min./Relative value, Celsius/Fahrenheit degree, and zero key. Features: 2.CLAMP MULTIMETER: Measures inrush current, VFD current/, AC/DC current, AC/DC , frequency, duty ratio, resistance, continuity, diode, capacitance, temperature, non-contact AC (NCV) detection, and live detection. 3.WIDE OPENING JAW: Opening jaw capacity is 40mm, wide enough to measure without disturbing the circuit. 4.LOUD BEEP: NCV sensor send out audible and visual alarm once received electromagnetic signal. 5.MORE FTIONS: Features data hold, flashlight, low display, Celsius/Fahrenheit degree, Max./Min./Relative value, and Zero(reset) key. 6.SAFE TO USE: Designed and conforms to IEC61010-1, CAT III 1000V, safe and reliable. 7.AUTO-OFF: Auto power off within 15 minutes if there is no operation, helps conserve the . 8.MULTI TESTER: Comes with 2 test leads and a thermocouple to be used as a multitester.