Pepperl+Fuchs Inductive sensor NJ1,5-8GM-N-10M

Manufacturer : Pepperl+Fuchs Inductive sensor NJ1,5-8GM-N-10M 1.5 mm flush Usable up to SIL 2 acc. to IEC 61508 Switching function : Normally closed (NC) Output type : NAMUR Rated operating distance : 1.5 mm Installation : flush Assured operating distance : 0 ... 1.215 mm Actual operating distance : 1.35 ... 1.65 mm typ. Reduction factor rAl : 0.4 Reduction factor rCu : 0.3 Reduction factor r304 : 0.85 Nominal ratings Nominal voltage : 8.2 V (Riapprox. 1 kΩ) Switching frequency : 0 ... 5000 Hz Hysteresis : 1 ... 10 typ. 5 % Suitable for 2:1 technology : yes , Reverse polarity protection diode not required Current consumption Measuring plate not detected : min. 3 mA Measuring plate detected :≤1 mA Compliance with standards and directives Standard conformity NAMUR : EN 60947-5-6:2000 IEC 60947-5-6:1999 Approvals and certificates UL approval : cULus Listed, General Purpose CSA approval : cCSAus Listed, General Purpose CCC approval : CCC approval / marking not required for products rated ≤36 V Ambient conditions Ambient temperature : -25 ... 100°C (-13 ... 212°F) Mechanical specifications Connection type : cable PVC , 10 m Core cross-section : 0.14 mm2 Housing material : Stainless steel 1.4305 / AISI 303 Sensing face : PBT Housing diameter : 8 mm Degree of protection : IP66 / IP67 Cable Bending radius : > 10 x cable diameter General information Use in the hazardous area : see instruction manuals Category : 1G; 2G