DRAGER Dräger/Draeger X-am 3500 Multigas Detector (8328419)

Set of Dräger X-am 3500 4Gas incl. charging equipment Dräger X-am 3500 Ex, O2, CO LC, H2S LC 8328418 incl. inductive power unit 8325825 and power supply 8316997 ​The Dräger X-am® 3500 was especially designed for clearance measurements. The 1 to 4 gas detector reliably detects flammable gases and vapours as well as O2, CO, H2S, NO2 and SO2. The innovative signalling design and extensive range of accessories ensure optimum safety and easy handling. ​1 to 4 gas detection device for clearance measurement detection of flammable gases and vapours as well as O2, CO, H2S, NO2 and SO2 The Dräger X-am 3500 is equipped with a very powerful pump. It can be connected with hoses of up to 45 metres in length. A pump adapter makes it easy to switch between diffusion and pump mode at any time. This means the pump is only operated when you actually need it. That saves energy, reduces wear and tear, and thereby extends the lifespan of the pump. Handy and durable, the Dräger X-am 3500 is intuitive to operate single-handedly using three function keys. The easy-to-read colour display clearly lays out all the information for you. Thanks to its compact and robust construction, the device can withstand even the harshest conditions. The signal system of the Dräger X-am 3500 is based on a clear colour code, in accordance with the requirements of the EN 60079-29-1, EN 45544-1 and EN 50104: Red light = gas alarm Yellow light = device-related alarm, e.g. low battery Green light = device is ready for use The green glow of the D-light allows you to see from a distance whether the device has been properly tested and is ready for use. In case of an alarm, the X-am 3500 alerts you with colourful alarm LEDs, a loud horn (100 dB(A) at a distance of 30 cm), and clearly palpable vibration. Optionally, four preset hazard symbols are available for the display which explicitly indicate the presence of explosive or toxic gas hazards, for example. This allows the user to easily recognise the type of hazard based purely on the symbol displayed. Bumptest and calibration are carried out simply and quickly using the Dräger X-dock® calibrating station. Its low test gas consumption keeps operating costs to a minimum. Its reporting function and numerous other useful features make the X-dock Manager PC software a smart addition to any fleet management operation. To identify the devices in the fleet, you can either use tried and tested barcodes or an integrated RFID transponder. The X-am 3500 features inductive charging. This makes it easier to operate and increases the lifespan of the device. Issues like corrosion and contact problems in the charging cradle are a thing of the past. You can charge (outside of explosion-hazard zones) and measure at once, e.g, when in use inside vehicles or on machinery. The charging cradle can connect with one another, taking up minimal space, and are compatible with existing Dräger X-am® series cradles. Measurable gases Ex, O2, H2S, CO or NO2 or SO2 Sensorports 4 Number of gases 1 - 4 Applications Personal Air Monitoring + Confined Space Entry Sensor technology CAT + EC Operation time >24h Dimensions (W × H × D) 0.08x0.18x0.04 m Weight 0.5 Kg Battery type Li-Ion Degree of protection (IP class) IP 68 Dual sensors ✗ CatEx Fullrange ✗ D-Light ✓ Internal pump ✓ X-am Pump ✗ X-zone 5500 Area Monitoring ✗ Bump Test Station ✗ X-dock Station ✓ ATEX I M1, II 1G, Ex da ia I Ma, Ex da ia IIC T4 Ga IECEx I M1, II 1G, Ex da ia I Ma, Ex da ia IIC T4 Ga c CSA us Class I, Zone 0, AEx da ia IIC T4 Ga Class II, Div 1, Gr. E, F, G; C22.2 No. 152, ANSI-ISA 12.13.01:2000 CE ✓ GOST (EAC) PO Ex da ia I Ma X, 0Ex da ia IIC T4 Ga X Performance approval ✓ Shipping approval (MED/DNV GL) ✓ Variants : To Include Optional accessories of 5m FKM hose ID 5 m FKM hose ID 3,2 mm with adapter for remote sampling (8325705 )