RIGHTWELL ESAB WELDING MACHINE TIG 2200I AC/DC TA34

Size (L x W x H)58 cm x 28 cm x 48 cm Highlight • Designed for quality TIG-welding in all types of material. • Easy to use - all welding parameters presented in an easy to understand layout. • QWave™- enables AC welding with high arc stability and low noise. • AC frequency and balance control - optimises weld pool. • Electrode preheating – excellent start and extended electrode life time • ESAB 2-program function - possibility to preprogram and change program during actual welding. • DC Pulsed TIG welding - easy control of heat input and the weld pool. • DC Micro Pulse – minimize heat effected zone especially on thin sheets • True MMA welding characteristics in AC and DC mode - Hot start, Arc force, and polarity switch (DC) Applications: • Repair and maintenance • General light fabrication and civil construction • Process industry • Shipbuilding and offshore • Transport and mobile machinery The Caddy™ is already a classic power source in the mobile welding equipment field. With the introduction of the Caddy™ Tig 2200i AC/DC series (TA33 and TA34) and a full range of accessories, you will find the optimal solution for a wide range of TIG welding applications. Designed for high quality TIG-welding In both DC and AC mode this TIG welding machine will give an excellent arc strike and consistent, stable arc. All types of material and thickness up to 5 mm can be welded with the highest quality. AC welding with QWave™ One of the most important tasks of an AC TIG machine is to provide a stable arc. The Tig 2200i has the QWave™ function which optimises the AC wave form to give a smooth arc and at the same time the lowest possible noise without compromising the weld result. This machine also has True AC rating where set current is always equal to the true current. Easy to use Two alternative control panels are available. Both have all the necessary functions for TIG DC, AC/DC and MMA welding, all presented in an easy to understand layout. The control panel Caddy™ TA34 AC/DC is the panel with the advanced functionality. AC Balance is the setting to control arc cleaning and penetration and AC Frequency setting is to control arc width. It also has a setting to control Electrode preheating with a possibility to have different shapes of the electrode and at the same time provide better starts with an extended life time of the electrode. The control panel Caddy™ TA33 is the easy way to weld AC TIG. You only need to set the plate thickness, and the machine will control the rest, allowing you to produce a quality AC TIG weld. Voltage Reduction Device - VRD In some areas a voltage reduction device, or VRD, is required. VRD is a safety function for MMA that limits the open circuit voltage from the machine to 24 V. Both control panels are prepared for VRD and the function can easily be activated inside the power source. Designed to be portable Working to tight deadlines in a tough industrial environment, you can do without those extra kilos. So our new Caddy™ has shed weight. Lighter, corrosion-free and smoothly rounded (no sharp corners!), the new highdurability housing will lighten your task.