SUNPOWERTECHNOLOGIES 110V50A Portable charger

Manufacturer : SUNPOWER TECHNOLOGIES SDN BHD Model : SPTMCU Low Maintenance Series Brand : SUNPOWER TECHNOLOGIES Country of Origin : Designed and manufacturered in Malaysia Standard compliance : IEC60146-1-1, IEC60529 (IP31), MS IEC 61000-4-11:2015 Type : Thyristor Controlled (2 Pulse drive for Single Phase) : Thyristor Controlled (6 Pulse drive for Three Phase) Input Data : 240Vac +/- 10%, for Single Phase, 50Hz/60Hz +/-5% 415Vac +/- 10%, for Three Phase, 50Hz/60Hz +/-5% Output Voltage (Vdc) : 12V, 24V, 30V, 48V, 60V, 110V, 220V & 375Vdc Output Current (Adc) : 1A to 1000 Amperes Float Charge Data : 80% to 140% (adjustable) Boost Charge Data : 100% to 150% (adjustable) Commisioning Charge : 110% to 160% (adjustable) Stability regulation output : +/- 1.0 % from 0 - 100% DC load at simultaneous variations of AC voltage input of +/-10% and frequency variation of +/-5%. Ripple Voltage (Vrms) : Standard 5% (without battery connected). Optional : < 0.1% / 1% / 2% / 3% or 4%. Rectification : Fullwave thyristor and diode control Overload : 110% continuos overload with short circuit protection by current limitng : thyristor controlled. Charger Current Limiting : Adjustable from 50% to 110% nominal current Battery Current Limiting : Adjustable from 10% to 20% from rated battery Ampere Hour (AH) Protection : Automatic current limiting : Slow start device : DC High voltage trip AC incoming MCB/MCCB : Mains DC incoming MCB/MCCB : Load Output MCB/MCCB : Battery Fuse/MCB/MCCB : AC suppression : Reverse battery protection : High speed fuse for charger output : RC suppression network : Voltmeter fuse : Blocking diode device : Boost Interlocking facilities to allow only one charger in Boost operation at one time